MS17796B
TABLE II. Dimensional tolerances.
Dimensions |
Bearing size |
Tolerance |
|
Inside diameter "A" and outside diameter "B" |
Up to 1.510 ID incl. |
+0.000 -0.001 |
1.511 to 2.510 |
+0.0000 -0.0015 |
|
2.511 to 3.010 |
+0.000 -0.002 |
|
3.011 to 3.507 |
+0.000 -0.003 |
|
|
Flange outside diameter "D" |
Up to 1.510 flanged OD incl. |
±0.005 |
1.511 to 3.010 |
±0.010 |
|
3.010 to 3.750 |
±0.025 |
|
Flange thickness "E" |
Up to 1.510 flanged OD |
±0.005 |
1.511 to 3.010 flanged OD |
±0.010 |
|
3.011 to 3.750 flanged OD |
±0.015 |
|
|
Length "C" |
Up to 1.495 incl |
±0.005 |
1.496 to 2.990 |
±0.0075 |
|
2.991 to 4.985 |
±0.010 |
|
Concentricity full indicator movement (FIM) |
Outside diameter (basic) |
Tolerances |
Up to 1.510 1.511 to 2.010 2.011 to 3.507 |
0.003 0.004 0.005 |
TABLE III. Chamfers.
Range |
Size |
Wall thickness up to and including 3/32" |
Break edges |
Wall thickness greater than 3/32" up to 3" outside diameter |
1/64 inch X 45 degrees |
All bearings over 3" outside diameter |
1/32 inch X 45 degrees |
10
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business