A-A-50602
4.7 Water absorption. Weigh and measure the size of the tested bearing. The bearings should then be placed in ASTM D 1141 synthetic seawater at 700 psi for three (3) months. Determine weight gain and dimensional swell.
4.8 Liner peelability and bond integrity. Determine liner peelability and bond integrity as specified in MIL-B-81934. Samples to be tested shall have completed water absorption testing prior to performing this test.
4.9 Creep. Load a bearing in a test rig as in 4.6 above to 25,000 psi and hold at pressure for 1000 hours. Determine the permanent set.
4.10 Shock. The bearing material will pass applicable shock requirements by successfully completing the radial static load test.
5. Metric product. Products manufactured to metric dimensions will be considered on an equal basis with those manufactured using inch-pound units, provided they fall within the tolerances specified using conversion tables contained in the latest revision of FED-STD-376, and all other requirements of this Commercial Item Description are met. If a product is manufactured to metric dimensions and those dimensions exceed the tolerances specified in the inch-pound units, a request should be made to the contracting officer to determine if the product is acceptable. The contracting officer has the option of accepting or rejecting the product.
6. Regulatory requirements. The offeror/contractor is encouraged to use recovered materials in accordance with Public Law 94-580 to the maximum extent practical.
7. Inspection of packaging. Sample packs and the inspection of packaging (preservation, packing and marking) for shipment, stowage and storage shall be in accordance with the requirements of packaging and the documents specified therein.
7.1 Packaging.
7.2 Commercial. Packaging and marking shall be in accordance with ASTM D 3951.
7.3 Military. The packaging (presentation, packing and marking) requirements shall be in accordance with MIL-B-197 for the level of presentation (A or C) the level of packing (A, B or C) and marking and other packaging acquisitioning options therein, as specified in the acquisitioning document. In addition for Navy acquisitions, the following shall apply:
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business